| Fire marine solutions | Marine fire protection | Ship halon phase out | Ship halon alternative | International halon bank |
 
 
Novec 1230 fire protection fluid: fire suppression agents

The new world standard for sustainable clean agent fire protection.

Novec 1230 fire protection fluid is based on a proprietary chemistry from 3M called C6-fluoroketone; it is also known as dodecafluoro 2-methylpentane-3-one; its ASHRAE nomenclature is FK 5-1-12 — the way it is designated in NFPA 2001 and ISO 14520 clean agent standards.

Typical Physical Properties Novec 1230 Fluid
Chemical Formula CF3CF2C(O)CF(CF3)2
Molecular Weight 316.04
Boiling Point @ 1 atm 49.2°C (120.6°F)
Freezing Point -108.0°C (-162.4°F)
Critical Temperature 168.7°C (335.6°F)
Critical Pressure 18.65 bar (270.44 psi)
Critical Volume 494.5 cc/mole (0.0251 ft3/lbm)
Critical Density 639.1 kg/m3 (39.91 lbm/ft3)
Density, Sat. Liquid 1.60 g/ml (99.9 lbm/ft3)
Density, Gas @ 1 atm 0.0136 g/ml (0.851 lbm/ft3)
Specific Volume, Gas @ 1 atm 0.0733 m3/kg (1.175 ft3/lb)
Specific Heat, Liquid 1.103 kJ/kg°C (0.2634 BTU/lb°F)
Specific Heat, Vapor @ 1 atm 0.891 kJ/kg°C (0.2127 BTU/lb°F)
Heat of Vaporization @ boiling point 88.0 kJ/kg (37.9 BTU/lb)
Liquid Viscosity @ 0°C/25°C 0.56/0.39 centistokes
Solubility of Water in Novec 1230 Fluid <0.001 % by wt.
Vapor Pressure 0.404 bar (5.85 psig)
Relative Dielectric Strength, 1 atm (N2=1.0) 2.3

3M Novec 1230 fire protection fluid is a high molecular weight material, compared with the first generation halocarbon clean agents. The product has a heat of vaporization of 88.1 kJ/kga and low vapor pressure. Although it is a liquid at room temperature it gasifies immediately after being discharged in a total flooding system.

Handling

There's a distinct advantage in handling a liquid agent-one that isn't pressurized and doesn't have a high vapor pressure at room temperature. 3M Novec 1230 fire protection fluid has a boiling point of 49°C (121° F). It can be shipped safely and effectively, without any restrictions, by air at a moment's notice in bulk quantities. In the shop, Novec 1230 fluid is easier to use than pressurized gas. Simply transfer the fluid from the container to the system cylinder, using a simplified closed loop process to avoid contamination. Then, superpressurize the cylinder with nitrogen.

The product is ideal for use in total flooding applications, localized flooding systems, directional spray type applications and may be used in portable extinguishers for specialized applications. But in addition to the conventional methods of super-pressurization using nitrogen, 3M Novec 1230 fire protection fluid also lends itself for use in pump applications because it is a liquid.

Materials Compatibility
3M Novec 1230 fire protection fluid has been shown to be compatible with typical materials of construction used in fire suppression systems. The material is stable and essentially inert, meaning it does not react with system components. It's also non-corrosive in its neat form. Long-term testing has demonstrated excellent compatibility with various elastomers used in o-rings, gaskets and other types of seals. However, we recommend that the product not be used with fluoroelastomers, because they are similar in composition to Novec 1230 fluid and have an affinity for each other, making them incompatible.

Tests have also shown that Novec 1230 fluid does not react with typical metals used in fire protection systems, including stainless steel, carbon steel, aluminum, brass and copper.





Features:
Provides a high safety margin with a 4.2% use concentration and a 10% NOAEL level.
Listed for protection against class A, B and C fires.
Is a fluid a atmospheric pressure and can be gravity fed for easy re-charge.
Extinguishes fire through heat absorption and not oxygen reduction.



Technical Specifications:
Novec™ 1230 Fluid presents distinct environmental benefits, including a zero Ozone Deletion Factor (ODP) and the lowest Global Warming Potential (GWP) of an chemical based clean agent, key to satisfying demands of environmentally sensitive markets and end users.
The Engineered System offering—allows design flexibility using our new Novec™ 1230 Fluid system design software.
Provides a high safety margin with a 4.2% use concentration and a 10% NOAEL and > 10% LOAEL level.
Minimizes Storage Space.
Listed for hazard temperatures between 0°F and 132°F.


Environmental Profile:
Non ozone-depleting 
Five-day atmospheric lifetime 
Global Warming Potential of 1 
This environmental profile is unmatched by any other halogenated agent, and helps make 3M Novec 1230 fire protection fluid today's long-term solution for protecting your high value assets.

3M Novec 1230 fire protection fluid is a next-generation halon alternative designed to balance industry concerns for performance, human safety and the environment, which makes Novec 1230 fluid the first option to non-sustainable technologies:

•Zero ozone depletion potential
•5-day atmospheric lifetime
•A global warming potential of 1

Its low acute toxicity, combined with high extinguishing efficiency, give 3M Novec 1230 fire protection fluid a significant margin of safety, even at relatively high extinguishing concentrations. This makes Novec 1230 fluid ideal for occupied spaces including engine and pump rooms, paint lockers and communication and control centers

3M Novec 1230 fire protection fluid offers a number of important advantages over other clean agents and CO2 in marine applications.

Its low acute toxicity, combined with high extinguishing efficiency, give Novec 1230 fluid a significant margin of safety, even at relatively high extinguishing concentrations, making Novec 1230 fluid ideal for occupied spaces including

•Engine and pump rooms
•Paint lockers
•Communication and control centers
•Saves space and weight
•Fast extinguishment
•Allows flexibility in design
•No restriction of shipping 

3M Novec 1230 fire protection fluid is a highly efficient extinguishing agent that:
•Is non-corrosive and electrically non-conductive, so it will not harm delicate electronics, radar, navigation and other equipment
•Evaporates quickly and completely
•Leaves no residue
•Can be safely used on energized equipment, helping to ensure continuity of operations during a fire emergency
Registrations and Certifications:
Fire protection systems incorporating 3M Novec 1230 fire protection fluid, developed and sold by leading systems manufacturers, have been registered and certified by a growing number of marine approval authorities:

UK MCA RINA, Italy
LRS Type Approval DNV Type Approval
Bureau Veritas Type Approval UK Module B
Polish Registry of Shipping Australian Coast Guard
Marine Marchand Approval Dutch Shipping Authority Acceptance, Inland & Sea
Belgium - Inland and Seagoing Acceptance Icelandic Registry of Shipping
American Bureau of Shipping (International) Canadian Coast Guard
Korean Registry of Shipping Germanische Lloyds
NK (Japan) U.S. Coast Guard

Environmental Profile:
Non ozone-depleting
Five-day atmospheric lifetime
Global Warming Potential of 1

This environmental profile is unmatched by any other halogenated agent, and helps make 3M Novec 1230 fire protection fluid today's long-term solution for protecting your high value assets.


  Immediate free quote
Contact us for an immediate free quote. 

Call us +39 0803118998
  E-mail: info@gielle.it  

Our quality is certified
Gielle makes its products inaccordance with UNI EN ISO 9001, UNI EN ISO 14001, SA8000:2001 certified quality standards

In accordance with established maritime standards
Gielle’s systems solutions have been tested and approved by marine regulatory agencies throughout the world.

Worldwide installation and service.
No matter where your vessel puts into port. From New York to Dubai, we perform whatever service is necessary including installation, retrofit, recharge, maintenance and emergency repair.

It's our global commitment to keeping your Gielle systems functioning perfectly and in accordance with applicable Marine fire protection regulations.

The right approvals and certifications.
Gielle Fire Systems' products carry an impressive range of Type Approvals and Flag Administration Approvals.

System design, installation & service
Gielle can provide the services (design and installation, retrofit, recharge, an d maintenance) necessary to keep your system functioning properly and in compliance with all applicable Marine fire protection regulations.
We provide complete stationary and mobile fire protection solutions from risk analysis via technical design to installation.

Gielle is the leading fullservice provider for fire protection in Europe and one of the leading companies worldwide.   

Marine, naval and offshore fire protection
Products from the Gielle Fire Suppression have been developed to meet not only the needs of today, but to also comply with evolving marine requirements, including environmental issues, local regulations and more. To every extent possible, we engineer the ability to upgrade our equipment directly into our product lines. In many cases, this gives owners the ability to avoid entire system replacements when conditions change. Each design innovation is supported by such important services as ongoing safety documentation.

Immediate free quote
Contact us for an immediate free quote. 


Call us +39 0803118998
  E-mail: info@gielle.it  



© 2009 Gielle Marine. All Rights Reserved. Created by www.omnilink.it